Oil Expeller Machine Price in Pakistan 2026: Capacity, Motor Power and Buying Checklist
Quick Answer: What is the Oil Expeller Machine Price in Pakistan?
There is no one price for all oil expellers. Published MMEC cold-press screw-machine listings provide useful 2026 reference points: PKR 150,000 at 10 kg/hour, PKR 250,000 at 15–20 kg/hour, PKR 350,000 at 25–30 kg/hour, PKR 450,000 at 35–40 kg/hour, and PKR 550,000 for an advertised 60 kg/hour model. These are product-listing figures for specific MMEC machines, not quotations for every conventional hot expeller or a full processing plant.
For industrial buyers, the more useful question is: What will the machine cost per kilogram of seed processed at the operating conditions you actually need?
What is an Oil Expeller?
An oil expeller is a mechanical machine that uses a rotating screw or other pressure mechanism to remove oil from oil-bearing material. During operation, prepared seeds enter a barrel, the screw compresses them, and oil separates from the remaining cake. Screw pressing is widely used in edible-oil processing.
The word expeller describes a mechanical extraction method. Cold pressed describes an approach to controlling processing temperature and handling. They are therefore not automatically opposite machine categories: a screw-type expeller can be operated or engineered for cold pressing, while other expeller applications use conditioning or added heat.
Compare MMEC Oil Press/Expeller Models
| MMEC Model | Listed Seed Capacity | Published Motor Power | Listed Equipment Price |
|---|---|---|---|
| SPO-0130 | 10 kg/hour | 0.75 kW (1 HP, approx.) | PKR 150,000 |
| SPO-0140 | 15–20 kg/hour | 1 kW on product listing | PKR 250,000 |
| SPO-0150 | 25–30 kg/hour | 1.5 kW on product listing | PKR 350,000 |
| SPO-0163 | 35–40 kg/hour | 2.2 kW on product listing | PKR 450,000 |
| SPO-0180 | 60 kg/hour | Confirm exact configuration | PKR 550,000 |
All capacities above refer to stated raw feed throughput, not kilograms of recovered oil. Motor details and model options must be confirmed against the quotation, because a motor's rating alone does not establish extraction output or electricity consumption.
Cold Press Versus Conventional Expeller: What is Different?
| Buying Question | Temperature-Controlled Cold Press | Heated / Conditioned Expeller Process |
|---|---|---|
| Main objective | Control oil temperature during pressing | Use preparation or heat where process requires it |
| Typical feed preparation | Cleaning, grading, moisture checks | Cleaning plus possible conditioning/heating |
| Operating temperature | Depends on specification and process standard | Depends on seed and process design |
| Oil characteristics | Depends on seed, heat exposure and handling | Depends on seed, conditioning and downstream treatment |
| Which is better? | Depends on product and buyer market | Depends on product and buyer market |
Do not accept an unverified claim that a press is always "100% cold" under every feed and load. Request the actual measured oil temperature during a demonstration if temperature is part of your brand promise.
Which Seeds Can an Oil Expeller Process?
Mustard/sarso, canola/rapeseed, sesame, sunflower and selected other oil-bearing seeds are common screw-press applications. But not every seed works equally well in every screw and barrel configuration. Hardness, size, moisture and oil content affect feeding and recovery. Ask for a manufacturer-approved seed compatibility list and ideally test your own material.
A mixed-seed business should also plan cleaning between batches to avoid cross-contamination and should control allergens appropriately where relevant.
How to Choose the Right Capacity
Suppose a buyer plans to process 200 kg of raw seed each workday. With a theoretical 20 kg/hour machine, the seed run takes 10 hours at rated throughput. A 40 kg/hour press could theoretically complete the seed feeding in five hours. Actual results will change with feed condition, stoppages, changeovers and the machine's recommended duty cycle.
Work backwards from daily raw-seed input—not from the expected number of oil bottles alone. Then estimate oil output using your tested recovery figure and allow time for filtration and packaging.
Electricity and Operating Cost Calculation
To understand the energy component, multiply motor input power (kW) by running hours only as a simple estimate; real energy use depends on load, power factor, auxiliaries and controls. For a machine with a listed 1.5 kW motor, eight hours at full rated input would be 12 kWh in a simplified motor-only example. At an illustrative PKR 60/kWh, that is PKR 720. This is not an MMEC power-consumption guarantee or a current Pakistan electricity tariff.
Your total cost must also include seed cost, transport, operator, waste, lubricants (where needed and food-safe), filter media, oil-cake handling, packaging, downtime and service.
Seven Checks Before Buying an Expeller
- Actual seed throughput: Ask for a witnessed trial with a known quantity of the seed you will use.
- Oil recovery and cake residual: Measure both instead of relying on a brochure percentage.
- Motor and supply: Confirm power in kW/HP, 220V or 380V, and single- or three-phase operation.
- Wetted/contact materials: Confirm food-contact material and maintenance instructions.
- Thermal behavior: Ask whether heating is present and what temperatures are measured under normal duty.
- Serviceability: Confirm screw and barrel replacement, bearings, training and local spares.
- Commercial terms: Request written warranty, tax, delivery and commissioning terms.
See MMEC's SPO-0130, SPO-0140, SPO-0150 and SPO-0163 pages to compare individual models.
Frequently Asked Questions
Are an oil expeller and a cold press the same thing?
Not exactly. "Expeller" refers to a mechanical pressing device; "cold press" describes a temperature-controlled processing approach. Some screw expellers are designed for cold pressing.
What size expeller is suitable for a small oil shop?
A 10–20 kg/hour raw-seed model may be worth evaluating, but the correct choice depends on daily demand, seeds, work hours, filtration and electricity supply.
Is higher motor HP always better?
No. Output and oil recovery depend on the entire press design and feed conditions, not motor rating alone.
Does 20 kg/hour mean 20 kg of mustard oil per hour?
No. In these machine listings it means approximately 20 kg of raw seed feed per hour, subject to test conditions. Finished oil output is a smaller and variable amount.
Should I buy only on quoted price?
No. Compare the tested cost per kilogram of processed seed, product quality, energy, downtime, warranty and spare parts.
Ask MMEC for an Oil Expeller Configuration
Send MMEC the oilseed name, intended daily raw-seed throughput, available voltage, filtration plan and target product. Ask for a machine demonstration and an itemized quotation.