Mustard Oil Machine Price in Pakistan 2026: Models, Yield and Business Costs
Quick Answer: How Much Does a Mustard Oil Machine Cost in Pakistan in 2026?
MMEC's published 2026 product listings show oil presses that may be suitable for mustard (sarso) oil production, starting at PKR 80,000 for a 3–5 kg/hour mini press, PKR 150,000 for a 10 kg/hour commercial press, PKR 250,000 for a 15–20 kg/hour press, and PKR 350,000 for a 25–30 kg/hour model. These are MMEC website-listed equipment prices, not guaranteed market-wide prices or installed project costs. Your actual price depends on configuration, filtration, electrical setup, accessories, transport and current quotation.
Mustard oil is commonly called sarso ka tel in Pakistan. A buyer searching for a "sarso oil machine," "mustard oil expeller" or "oil nikalne wali machine" may be looking for the same general job: mechanically extracting oil from mustard seeds. However, machines can differ greatly in operating temperature, capacity and oil quality.
MMEC Mustard Oil Press Prices and Capacities
| MMEC Model | Listed Seed Throughput | Published Price | Likely Buyer Profile |
|---|---|---|---|
| SPO-0110 mini cold press | 3–5 kg/hour | PKR 80,000 | Home use, trials, micro-business |
| SPO-0130 cold press | 10 kg/hour | PKR 150,000 | Small shop and startup |
| SPO-0140 cold press | 15–20 kg/hour | PKR 250,000 | Growing retail oil brand |
| SPO-0150 cold press | 25–30 kg/hour | PKR 350,000 | Medium commercial operation |
| SPO-0163 cold press | 35–40 kg/hour | PKR 450,000 | Higher-volume oil processing |
Price Basis Note:
MMEC's own product listings reviewed in October 2026. Prices should be reconfirmed before a customer is offered a quote. Important: kg/hour represents raw seed processed, not kilograms of finished oil produced.
A lower-price machine may be appropriate for demonstration or household production. A commercial business normally needs to consider duty cycle, a reliable power supply, filtration, spare parts and a realistic demand forecast—not just the lowest purchase price.
How a Mustard Oil Extraction Machine Works
A screw press feeds cleaned mustard seeds into a compression chamber. The rotating screw applies pressure and pushes oil through openings while the remaining pressed material exits as oil cake, commonly called khal. The extracted crude oil may then settle and pass through a food-compatible filter before packaging.
A practical mustard oil processing workflow is:
- Inspect and clean the seeds: Remove stones, metal, dust and damaged material. Reject moldy or visibly spoiled seed.
- Check moisture and condition: Seed preparation should follow the seed variety and machine manufacturer's tested operating instructions; excessive moisture or extremely dry seed can hurt pressing performance.
- Run a controlled trial batch: Start with known, weighed seed, check machine settings and record operating conditions.
- Measure oil and oil cake separately: Weigh recovered oil and cake; also account for handling and filtration losses.
- Filter and store responsibly: Use clean, food-grade contact surfaces and suitable containers, and follow applicable food-safety requirements.
Proper cleaning matters because grit and stones can increase equipment wear and contaminate the product. The UN Food and Agriculture Organization (FAO) describes seed cleaning and preparation as normal upstream steps in mechanical oil extraction.
How Much Mustard Oil Comes from 100 kg of Sarso Seed?
There is no single guaranteed oil yield for every mustard seed and every press. Oil content depends on seed variety and growing conditions; recoverable oil depends on conditioning, screw design, temperature, operating speed and oil remaining in the cake.
Illustrative Production Trial
For planning only, consider an illustrative trial in which 100 kg seed produces 30 kg oil. That is a 30% recovered oil mass yield, not a promise of MMEC machine performance. If the same batch yields 27 kg rather than 30 kg, your product cost per kilogram changes materially. Request a supervised extraction test using your own seed before selecting a commercial machine.
Calculate oil cake output and processing losses separately. Do not confuse extraction efficiency (share of available oil recovered) with oil yield (share of total seed mass recovered as oil).
Operating Cost: A Realistic Example
Machine price is only one line in the budget. Your cost per kilogram of finished oil includes seed procurement, transport, electricity, labor, filter media, packaging, wastage, maintenance and facility expenses.
For example, the SPO-0130 product listing specifies a 0.75 kW motor. Eight hours at full rated motor power would equal up to 6 kWh as a simplified motor-only calculation (0.75 × 8). At an illustrative—not official—electricity rate of PKR 60/kWh, the motor-only amount would be PKR 360. Real bills may differ because actual load, starting current, other equipment, taxes, tariffs and utilization differ.
Likewise, a press rated at 10 kg/hour processing 100 kg of seed needs roughly ten operating hours before allowance for stoppages, cleaning or throughput variation. Total business cost must not be calculated from motor power alone.
What Should Buyers Ask MMEC Before Ordering?
Ask for a written quotation covering the exact model, seed type, demonstrated kg/hour input capacity, power phase, installed motor, temperature-control arrangement, filtration options, spare-parts availability, warranty terms, delivery and training. If you intend to sell packaged cooking oil, check your business's applicable food safety, labeling and registration obligations.
MMEC's published range includes the SPO-0110 mini press, SPO-0130, SPO-0140, and SPO-0150. The existing MMEC mustard oil business guide provides related business-planning context.
Frequently Asked Questions
Is sarso oil machine different from a mustard oil machine?
In most Pakistani buying searches, sarso means mustard. The key difference is the actual machine design and production specification, not the language used in the search term.
What is the cheapest MMEC option listed for mustard oil pressing?
The mini SPO-0110 is published at PKR 80,000 with an estimated 3–5 kg/hour seed capacity. Check mustard-seed suitability and current quotation before buying.
Can a cold press machine make mustard oil for commercial sale?
Yes, if its material compatibility, actual output, hygiene, filtration and operating characteristics meet your business needs. Commercial sale also involves packaging, labeling and applicable regulatory requirements.
Is 100 kg of mustard seed equal to 35–40 kg of bottled oil?
Not necessarily. Seed oil content, mechanical recovery and filtration losses vary. Use a documented production test instead of assuming a fixed yield.
Do I need a separate oil filter machine?
For consistently clarified retail oil, filtration is commonly part of the workflow. The appropriate solution depends on oil quality, production volume and the desired finished product.
Get a Mustard Oil Machine Quotation from MMEC
Maqbool Mughal Engineering Company (MMEC) supplies oil processing equipment in Pakistan. Share your seed type, desired hourly throughput, power supply and packaging goals to request a model-specific quotation and seed-trial guidance.